Knowledge Base Articles
Browse Results: ICX 7750 > Known Issues and Workarounds
-
What are the cables needed for ICX7250, ICX7450, ICX7750 Console Access?
Description of the different cables needed in order to access via console the ICX7250, ICX7450, ICX7750 devices using a USB port -
Switch reset on ICX7750 stack when configuring "no raguard trust" on disabled port 2/1/1
Removing the Configuration of raguard trust can cause active stack unit to reset. -
SNMP reporting much higher temperature after upgrade from 8010m to 8030k
SNMP reporting much higher temperature after upgrade from 8010m to 8030k -
Port reports Up/Blocking on ICX when no devices connected to it
Port reports Up/Blocking on ICX when no devices connected to it. -
Error message after upgrade - Optics <-> Speed mismatch, replace with SFP optic
After upgrade to 8.0.30k and reboot started seeing error message via console -
Multiple flaps are noticed on ICX7450 during ICX7750 reload with a 1G interconnection.
ICX7450 1G peer port flap happens during ICX7750 reload. -
DSCP traffic through ICL
-
TFTP received error request -- code 1 message File not found
TFTP received error request -- code 1 message File not found -
Certificate of Entitlement for ICX7750 (ICX7750-L3-COE)
Explanation of the Certificate of Entitlement for the ICX 7750s (ICX7750-L3-COE) -
FastIron on 8060 or newer are not passing EAPOL broadcasts
8.0.60 or above is blocking the EAPOL broadcast addresses from switching no matter which media or ports/plans we use. It clearly works in 8.0.30 or below as shown by the packet captures. Please let us know if anything else is needed.