Knowledge Base Articles
Browse Results: ICX 6610
-
What is recommended for a multicast routing design?
Multicast implementation helps efficiently forward IP packets that are destined for two or more receivers, which in turn helps to save network bandwidth and data replication at the source. -
FAQ on ICX6610 PSU's
-
How to delete "Crash dump information" message in boot up?
During boot up, *** Crash dump information is available; please collect it using "supportsave" CLI *** message. -
May see intermittent bursts of InErrors, CRC errors and link flapping on 10Gbps ports. The issue is more prevalent with jumbo frames enabled.
-
Enable IGMP snooping and MLD snooping under VLANs on the access switches in the school and district office.
-
PIM-SM stands for Protocol Independent Multicast (PIM) Sparse Mode (SM).
-
Why is ICX6610 FAN always high speed when 2 PSU devices are installed?
ICX6610 FAN is always high speed when 2 PSU devices installed. -
SNMP reporting much higher temperature after upgrade from 8010m to 8030k
SNMP reporting much higher temperature after upgrade from 8010m to 8030k -
Correct show command to display the dhcp snooped mac/arp associations
Explanation of the correct show command used in order to display the dhcp snooped mac/arp associations. -
What is IGMP/MLD Snooping and how should it be configured?
When Brocade ICX product family switches process a multicast packet, by default, they broadcast the packet to all ports except the incoming port of a VLAN. This behavior causes some clients to receive unwanted traffic