Knowledge Base Articles
Browse Results: ICX 6450
-
What is recommended for a multicast routing design?
Multicast implementation helps efficiently forward IP packets that are destined for two or more receivers, which in turn helps to save network bandwidth and data replication at the source. -
How to delete "Crash dump information" message in boot up?
During boot up, *** Crash dump information is available; please collect it using "supportsave" CLI *** message. -
May see intermittent bursts of InErrors, CRC errors and link flapping on 10Gbps ports. The issue is more prevalent with jumbo frames enabled.
-
Enable IGMP snooping and MLD snooping under VLANs on the access switches in the school and district office.
-
PIM-SM stands for Protocol Independent Multicast (PIM) Sparse Mode (SM).
-
Correct show command to display the dhcp snooped mac/arp associations
Explanation of the correct show command used in order to display the dhcp snooped mac/arp associations. -
How to upgrade an ICX 6430 or ICX 6450 stack from 07.4.00 to 08.0.10 version or later?
How to properly upgrade an ICX 6430 or ICX 6450 stack from 07.4.00 to 08.0.10 version or later? -
What is IGMP/MLD Snooping and how should it be configured?
When Brocade ICX product family switches process a multicast packet, by default, they broadcast the packet to all ports except the incoming port of a VLAN. This behavior causes some clients to receive unwanted traffic -
Invalid src ip 0.0.0.0 message with DAI
Dynamic ARP Inspection (DAI) allows only valid ARP requests and responses to be forwarded. -
How can I stack ICX 6430 or ICX 6450 devices using ports 1/2/2 and 1/2/4 as stacking ports?
Enable stacking between the devices without disrupting production.