Knowledge Base Articles
Browse Results: ICX 7150 > Known Issues and Workarounds
-
ICX 7150 lose licensing and switch config if ECC error (TSB 2017-268-A)
If an ICX 7150 switch encounters a multi-bit ECC error in the NAND flash memory during boot up, the ICX 7150 switch will lose the license information and configuration files that are stored in the NAND flash. -
Error message after upgrade - Optics <-> Speed mismatch, replace with SFP optic
After upgrade to 8.0.30k and reboot started seeing error message via console -
Why ICX 7150 and ICX 7650 switches do not retain clock date and time upon power cycle?
ICX 7150 and ICX 7650 switches do not retain clock date and time after power outage -
FastIron on 8060 or newer are not passing EAPOL broadcasts
8.0.60 or above is blocking the EAPOL broadcast addresses from switching no matter which media or ports/plans we use. It clearly works in 8.0.30 or below as shown by the packet captures. Please let us know if anything else is needed. -
ICX 7150 boot error: BUG: soft lockup - CPU#0
How to debug "soft lockup" error -
PoE port flaps for a period of time after a stack reload
PoE ports keep flapping during a period of time from some minutes up to an hour after a stack reload. -
ICX-7150-24F tranceiver recovery SFP (TSB 2020-009)
This bulletin is about anomalous behavior of a link using TX SFP (Copper SFP) on an ICX7150-24F. -
This Bulletin describes a condition resulting in SSH service disconnection on ICX devices after upgrading to 09.0.10d release
-
This Bulletin describes a condition when NAND bad blocks are displayed on the ICX7150