Knowledge Base Articles
Browse Results: ICX 7450
-
How to configure Uni-Directional Link Detection?
Uni-Directional Link Detection (UDLD) monitors a link between two Brocade devices that are not directly connected. -
Multiple flaps are noticed on ICX7450 during ICX7750 reload with a 1G interconnection.
ICX7450 1G peer port flap happens during ICX7750 reload. -
TFTP received error request -- code 1 message File not found
TFTP received error request -- code 1 message File not found -
Which FastIron platforms and software versions support Multicast routing on a MCT cluster?
Which FastIron platforms and software versions support Multicast routing on a MCT cluster? -
FI device may unexpectedly reload when plugging/unplugging phone by LLDP.
-
Avaya 9608 not negotiating PoE needs properly
Avaya 9608 not negotiating PoE needs properly -
Avaya 1608/1616 phones not powering up on POH ports 1-8 (ICX7450)
Avaya 1608/1616 phones not powering up on POH ports 1-8 (ICX7450) -
Cisco 2602i AP complaining of LOW power
Cisco 2602i AP complaining of LOW power -
FLOW MOD ERROR in ICX Switches
In an untagged Hybrid Port, Flow must be added with the VLAN ID field. -
FastIron on 8060 or newer are not passing EAPOL broadcasts
8.0.60 or above is blocking the EAPOL broadcast addresses from switching no matter which media or ports/plans we use. It clearly works in 8.0.30 or below as shown by the packet captures. Please let us know if anything else is needed.