Knowledge Base Articles
Browse Results: ICX 7450 > Known Issues and Workarounds
-
ICX 7250 7450 PoE port flap on 08.0.30f and above (TSB 2017-264 [A])
The user may experience port flaps on ICX7250 & ICX7450 in a corner case scenario. If ‘inline power non-pd-detection enable’ command is configured, the flaps are seen. -
What are the cables needed for ICX7250, ICX7450, ICX7750 Console Access?
Description of the different cables needed in order to access via console the ICX7250, ICX7450, ICX7750 devices using a USB port -
Cisco 7690 phones not powering up on ports 1-8(ICX7450)
Help to resolve CISCO 7690 phones not powering up on ports 1-8 -
SNMP reporting much higher temperature after upgrade from 8010m to 8030k
SNMP reporting much higher temperature after upgrade from 8010m to 8030k -
7250 ports connected to 7450 do not come up when 7250 reloaded.
-
Error message after upgrade - Optics <-> Speed mismatch, replace with SFP optic
After upgrade to 8.0.30k and reboot started seeing error message via console -
Multiple flaps are noticed on ICX7450 during ICX7750 reload with a 1G interconnection.
ICX7450 1G peer port flap happens during ICX7750 reload. -
TFTP received error request -- code 1 message File not found
TFTP received error request -- code 1 message File not found -
FI device may unexpectedly reload when plugging/unplugging phone by LLDP.
-
Avaya 9608 not negotiating PoE needs properly
Avaya 9608 not negotiating PoE needs properly