Knowledge Base Articles
Browse Results: Ruckus ICX Switches > Firmware
-
Update error: Bad image header, Invalid image file
-
How do I reset the controller and APs to factory default for 5.x code?
Valid information for software code WiNG 5.x running on RFS4000, RFS6000, RFS7000, AP7131, AP650. -
Ruckus Mesh Max Hops and Loop Detection
Mesh algorithms are intelligent and dynamic, adjusting to conditions between last MAP and Root AP -
Where can I find Ruckus ICX FastIron Target Path Selection Guide?
The Ruckus FastIron Target Path Selection Guide is available on the Ruckus Support Portal. Select switch from product pages, then technical documents from choices on the right. -
Issues with Pre-standard PoE phones on ICX switches
Use the 'legacy-inline-power' command on ICX switches to be sure of Pre-standard PoE phone compatibility -
Loading code from Boot menu (Emergency Code Download)
Loading code from Boot menu ICX 6430, ICX 6450, ICX 6650, ICX 7450, ICX 7750, and FSX -
Firmware upgrade ICX via USB using system-manifest fails if TFTP client is disabled
When using 8.0.90 you can use the newly introduced copy manifest command, but it only works when TFTP client in the ICX switch is disabled. -
ICX MAC based dynamic VLAN assignment without RADIUS
We can use MAC filtering with MAC-authentication to assign dynamic VLANs without RADIUS. -
Firmware upgrade with manifest file
ICX firmware version 8.0.00a or higher supports upgrade via manifest file. This article explains how one can upgrade the ICX switches easily with manifest file. -
Using ICX to serve DHCP option 43 to another ICX switch
You can configure internal DHCP on ICX switches to serve option 43 to other ICX switches.