Knowledge Base Articles
Browse Results: ZoneFlex Indoor > Known Issues and Workarounds
-
BonJour GW enabled for Airsever fails to broadcast iPAD content
I have enabled BGW and configured the services properly for VLAN mapping of the bridge service I need. The issue is that the iPads can "see" the airserver computers on the other VLAN domain- but they cannot broadcast the iPAD screen successfully over the GW configured -
Apple iOS wireless client connection issue when exiting sleep mode
I have R700's and many different wireless clients. I am using iOS 8.1 , and 802.11r is activated on the WLAN. The iPad Air 2 connects fine to start with but after it has been in sleep mode for an extended time it does not reconnect. To fix this I need to reboot the iPad Air and then it... -
What do I need to know about the Band-Balancing or steering behavior in Ruckus APs?
Band Balancing is a feature that was added starting with Ruckus SW Release 9.3.0. ( It was originally called Band Steering) - It operates independently from Client Load balancing but can work with this feature. This article talks about default band balancing behavior and CLI options available to... -
Actions to take in case of DHCP Decline message from the client
This article explains what causes DHCP Decline response from a client, how to diagnose the problem, and what needs to be done to fix the issue. -
11ac Clients are getting low throughput when connected to R700 AP
Laptops appear to get low throughput when connected to R700 AP -
Frequency of Neighbour AP's list update
This article provides information regarding the time interval for Updating the Neighbour AP's list -
Heartbeats lost message from an AP and prevention
This article explains possible reasons for a heartbeats lost message and how to prevent them. -
Standalone AP client devices cannot talk to each other Chromecast
You can manually disable client isolation on standalone APs to allow client devices to communicate -
Registering an AP with vSCG / SCG
Adding new access point to vSCG (or SCG)