Knowledge Base Articles
Browse Results: Unleashed > Known Issues and Workarounds
-
Actions to take in case of DHCP Decline message from the client
This article explains what causes DHCP Decline response from a client, how to diagnose the problem, and what needs to be done to fix the issue. -
Why do APs report stuck beacons or high airtime on 2.4G radios?
High interference can cause APs to raise NF and report stuck beacons -
Unleashed: AP fails to join master when using 192.168.101.x or 192.168.50.x subnet
Unleashed AP fail to join master when using 192.168.101.x or 192.168.50.x subnet -
Unleashed: Key differences from ZD/vSZ/SZ100
Unleashed provides only some of the controller features found in ZD or vSZ/SZ100 -
Unleashed: How to recover non-GA release APs
Unleashed APs running GA release code will recognize/upgrade/downgrade/configure other GA release Unleashed APs. If you somehow are running a non-GA release of Unleashed, these are the necessary steps to recover them for use. -
Does Unleashed AP support Layer 3 roaming
Does unleashed AP support Layer 3 roaming -
Unleashed: Standby Master AP take over time
Unleashed Master/Standby APs exchange heartbeats every 6 seconds, and Standby won't take over unless 1 minute w/o Heartbeat. -
Unleashed: Master/Standby Master AP failover information
Timing involved for a Master AP to failover to the Standby Master AP. -
Is it possible to convert regular R500/R600 to Unleashed and vice versa?
It is possible to re-flash an existing R500/R600 AP to Unleashed for evaluation, but it's recommended to purchase Unleashed SKUs due to different support models. Re-flashed APs are not for re-sale and are not eligible for Unleashed support. -
Converting Ruckus Unleashed AP to Standalone AP
This article explains how to convert an Unleashed AP to ZoneFlex Standalone mode AP.