Knowledge Base Articles
Browse Results: Unleashed > Troubleshooting
-
Seeing client disconnects after enabling ChannelFly
Seeing client disconnects after enabling ChannelFly -
Running Iperf to cross-check SpeedFlex test results
This article explains how to run Iperf if a customer would like to cross-check SpeedFlex results. -
Actions to take in case of DHCP Decline message from the client
This article explains what causes DHCP Decline response from a client, how to diagnose the problem, and what needs to be done to fix the issue. -
Best Practices - AP Mesh Networking - Outdoor Guide attached
What are Ruckus Best Practice guidelines for AP Mesh Networking, including Outdoors? -
Why do APs report stuck beacons or high airtime on 2.4G radios?
High interference can cause APs to raise NF and report stuck beacons -
Unleashed: AP fails to join master when using 192.168.101.x or 192.168.50.x subnet
Unleashed AP fail to join master when using 192.168.101.x or 192.168.50.x subnet -
Unleashed: How to recover non-GA release APs
Unleashed APs running GA release code will recognize/upgrade/downgrade/configure other GA release Unleashed APs. If you somehow are running a non-GA release of Unleashed, these are the necessary steps to recover them for use. -
Unleashed: Standby Master AP take over time
Unleashed Master/Standby APs exchange heartbeats every 6 seconds, and Standby won't take over unless 1 minute w/o Heartbeat. -
Unleashed: Master/Standby Master AP failover information
Timing involved for a Master AP to failover to the Standby Master AP. -
HSTS protection can break redirect for Chrome and Android browser error
Browser protection mechanism can affect WiSPr and Guest Access portal redirection.