Knowledge Base Articles
Browse Results: Unleashed > Performance
-
Ruckus Product Information - DATA SHEETS, FEATURES, CASE STUDIES, WHITE PAPERS, APPLICATION NOTES
Ruckus Product Information - DATA SHEETS, FEATURES, CASE STUDIES, WHITE PAPERS, APPLICATION NOTES -
Running Iperf to cross-check SpeedFlex test results
This article explains how to run Iperf if a customer would like to cross-check SpeedFlex results. -
Best Practices - AP Mesh Networking - Outdoor Guide attached
What are Ruckus Best Practice guidelines for AP Mesh Networking, including Outdoors? -
Why do APs report stuck beacons or high airtime on 2.4G radios?
High interference can cause APs to raise NF and report stuck beacons -
Unleashed: Key differences from ZD/vSZ/SZ100
Unleashed provides only some of the controller features found in ZD or vSZ/SZ100 -
Unleashed Maximum Concurrent Clients - R310 AP limitations
512 is the max number of clients in an Unleashed network, except 100 max per R310 and Wave1 APs in GW Mode, and 200 max for Wave 2 APs in GW Mode. -
Unleashed GW Mode AP maximum WAN bandwidth
Unleashed GW mode 802.11ac Wave2 APs have 200mbps WAN uplink versus Unleashed 802.11ac Wave1 model AP 100mbps GW mode max WAN throughput. -
Unleashed GW / Master Mode AP maximum Clients = 100 for all model APs?
Unleashed GW/Master Mode AP performs multiple functions, reducing max Client support to 50 or 100 depending upon AP model. -
Unleashed AP getting into "founding unleashed network " state loop
Trying to set up unleashed network and every time after the initial configuration from the set up wizard is performed the AP goes into - founding unleashed network state. -
Apple iOS 11 clients unable to connect to open SSID
Apple devices after upgrading iOS to 11/11.0.1 can get valid IP addresses but drop off from wifi immediately