Knowledge Base Articles
Browse Results: virtual SmartCell Gateway > Security
-
Not able to install Wild Card Certificate on vSCG
Uploading the Wildcard certificate gives error “Unable to upload the private key. Reason: The key file is not valid” -
Login credentials for APs in the staging zone
This article mentions credentials required to login to APs that are in the staging zone -
R710 AP cannot connect after upgrading controller to SmartZone v3.1.1
AP certificate issues may prevent R710 from connecting to vSZ/SCG/SZ-100, or cause client webauth/guest pass authentication failure. -
SCG/SZ Management certificate
How do I upload new certificates to SCG/SZ/vSZ -
SmartZone UDP:3799 port for AAA CoA and DM
UDP port 3799 is necessary for RADIUS CoA and DM messages and are ONLY supported in Proxy Mode. -
SZ AP running 3.2.1 patch 1 reboot when Client Isolation enabled and 5+ DNS servers defined
SZ AP running 3.2.1.0.659 (SCG code 3.2.1.0.193) rebooting with Hardware Watchdog Timeout when client isolation on WLAN is enabled and DNS returns 5+ DNS server list. -
Email SMTP messages not working
Email setup email works but subsequent alarms are not being sent via SMTP as we are triggering but no messages reaching via email -
Configuring an 802.1x authentication WLAN with Radius AAA proxy-mode on vSZ
You can configure AAA proxy-mode for 802.1x WLANs in vSZ (SCG/SZ100). -
ZoneDirector vs Smartzone WLAN Architecture Review
Detailed descriptions to understand WLAN architecture from ZoneDirector to SmartZone platform.