Knowledge Base Articles
Browse Results: SmartCell Gateway > System Network Management
-
No response received for Smart Zone NBI post
This article explains possible reasons for no response being received for calls to the Smart Zone NBI interface. -
Enabling SNMP on SmartZone managed AP
This article explains the procedure to enable SNMP service on SmartZone controller managed APs -
FAQ: Ruckus AP Device Certificate Refresh
Device certificates on Ruckus APs manufactured prior to January 2016 may require a certificate refresh prior to November 2016 to avoid service interruption. -
How to configure admin user via radius to logon to SCG / SZ-100 / vSZ thru the CLI
This article describes how to configure an admin user thru the CLI to logon to the SCG / SZ-100 / vSZ controllers via RADIUS rather than Local DB. -
Prevent ports assigned to Ruckus APs from being utilized by other devices
This article explains security mechanisms which may be implemented to prevent ethernet ports assigned to access points being used by other devices. -
Master KBA: All about Ruckus 802.11ac APs
Top Level KBA to provide links to related topics: 802.11ac APs -
Third party SNMP monitoring of SCG/vSCG managed APs
Customers can load SCG SNMP MIBs on third party monitor applications. -
Signal strength of the client to the SCG/SZ
Determining signal strength for clients connected to SCG/SZ -
VLAN configuration on Ruckus ICX switches for Ruckus Wireless WLAN's
Adding untagged & tagged vlan on the same switch port on Ruckus ICX switch. -
SZ: How do User Traffic Policies (UTP) work, how are they applied?
Tunneled WLANs can apply UTPs at central location, else APs apply them locally.