Knowledge Base Articles
Browse Results: SmartCell Gateway > Firmware
-
SmartZone Ports to be open on a Firewall w/NAT
What ports/protocols need to be open to permit AP to SmartZone controller communication, and if including NAT? -
How to convert vSCG/SCG APs to Standalone or ZD managed
vSCG/SCG APs: Perform factory default and load new firmware image for Standalone or ZD management use -
Master KBA: All about AP firmware - Standalone, ZD, or vSCG/SCG/SZ managed
This is a collection of articles on how to configure Access Points for any use. -
Unable to register ZD-based AP to vSCG 2.x
Early SCG 2.x versions need to enable LWAPP2SCG policy to auto-convert ZD managed APs. -
We can upgrade multiple vSCG instances in a cluster
-
SCG200: Unable to upgrade SCG past version 2.6
Can't upgrade SCG beyond 2.6 without factory default -
What tools can I use to test API’s on SmartZone platform
This article describes 2 software tools that can be used to test API’s on SmartZone platform -
R710 AP cannot connect after upgrading controller to SmartZone v3.1.1
AP certificate issues may prevent R710 from connecting to vSZ/SCG/SZ-100, or cause client webauth/guest pass authentication failure. -
Disable Directed Multicast in SZ controlled APs
Disabling Directed Multicast and Broadcast in SCG/vSCG controlled APs -
SCG-200: System Log / Disk Depletion possible in RuckOS prior to SZ 3.1.1 b249
Certain malformed packets incorrectly handled, can result in dramatically increased system logs, leading to free disk space depletion.