Knowledge Base Articles
Browse Results: SmartCell AP
-
SZ controlled Access Points not transmitting SSIDs
Newly added Access Points are not transmitting any SSIDs -
Can I move AP with mesh enabled to another Zone in v3.4.2
APs with mesh enabled cannot be moved to other Zones with different mesh network name or passphrase, or to a mesh disabled zone. This is by design to protect AP connectivity. Tested in 3.4.2 -
Access Point status when added using Pre provisioning CSV Script
What state should AP's be displayed in SZ GUI when added to cluster using AP Pre-provisioning CSV script and do they consume AP licenses -
SZ AP Ethernet Port configuration not showing group or zone level configuration
Customer disabled ports on an H510 model specific configuration at the Zone level but the configuration did not propagate to the AP's -
Disable TLSv1.0 on Ruckus AP managed by v/SZ
Some APs on the Network are working on TLSv1.0 and customer wants to disable it and use TLSV1.1 or TLSV1.2 -
Downloading AP support info diagnostic file for SZ controlled Access Points
To assist customer NOC teams with determining which AP a client is connected to and how to download the AP support info if AP is connected or not connected. -
SCI Airtime reports showing unrealistic high values
Airtime displayed in SCI is not reasonable value - showing numbers in 1000's % while it should always be less then 100% -
SZ controlled Access Points loosing contact to SZ with Q in Q Tunnel in AP access network
SZ controlled Access Points connected across a network that included Q in Q tunnel unable to maintain SSH control tunnel -
R510 Max Possible Bandwidth on 2 Pair Connection
What are the bandwidth limitation when using only 2 pairs of UTP cable. -
Determining AP transmit power changes made by Auto Cell Size (ACS) feature
AP CLI command get auto-cell <interface> and AP syslog commands provide information on Transmit power changes done by Auto Cell Size (ACS) feature