Why 5G LED of R310 is off?
Summary
5G LED of wave 1 & AP is off with SCG AP image if original image was R110 standalone image.Question
Why 5G LED of R310 is off?Customer Environment
3 node SZ100 cluster + over 1000 APs Software version is 3.4.2.x.Root Cause
R110.x.x.x image does not have compatibility with 3.4.2 and earlier image, so if AP with R110.x.x.x image joins to SZ/SCG with 3.4.2 and earlier image, you will see 5G LED problem.Troubleshooting Steps
Check if AP has the following configuration.- get rpmkey wsgclient/managed
If AP hits this issue, output will be as below.
rkscli: get rpmkey wsgclient/managed
Error: (bad key: wsgclient/managed)
If AP does not hit this issue, out put will be as below:
rkscli: get rpmkey wsgclient/managed
wsgclient/managed = 1
OK
Workaround
Try the following commands on AP CLI.1. set rpmkey wsgclient/managed 1
2. reboot
Resolution
There are 2 resolutions.1. R3.5 does not have this issue
2. R104 standalone can work fine with R3.4 and earlier image
Article Number:
000008845
Updated:
September 01, 2020 09:00 PM (over 2 years ago)
Tags:
Troubleshooting, Known Issues and Workarounds, SmartCell Gateway, SmartCell AP
Votes:
2
This article is:
helpful
not helpful