What IP addresses do I need to add to my Firewall or Content Filter for the Ruckus Cloud WiFi?

Summary

These are the IP addresses and URLs that need to be added to Firewall/Content Filters, that will allow Ruckus Access Points to access the Ruckus Cloud WiFi Controllers to successfully connect to cloud controller.

Question

Customer Environment

Firewall, Content Filter. EU, NA

Root Cause

After an upgrade or change in controller public IP address range, Ruckus Cloud WiFi Access Point will not connect to Ruckus Cloud WiFi Controller and will show up in the Cloud user interface as "Never contacted Cloud". The AP will continue to service clients as it will still be connected to the previous version controllers.

Resolution

Please add the following FQDN's and IP Addresses to your Firewalls or Content Filters to allow your Ruckus Access Points to connect to the Ruckus Cloud WiFi Controllers.

For All Regions:
ap-registrar.ruckuswireless.com
OCSP.ComodoCA.com
cloud.ruckuswirless.com
cloud-eu.ruckuswireless.com

Cloud Controller public IP addresses as of 1805 version:

For the North America Region:

34.66.82.169

35.225.236.82

35.193.119.3

35.225.236.82

146.148.60.5

34.68.248.217

For the European Region and rest regions:

35.242.215.12

35.246.193.51

Cloud Controller public addresses as of 20.01 version:

34.66.162.64/27

34.89.230.64/27

34.92.234.64/27

Note: IP addresses may change due to new controller addition, hence please contact Ruckus support, if you are still facing issues to connect your APs to Ruckus Cloud WiFi controller.

Article Number:
000007992

Updated:
June 29, 2020 02:09 AM (over 2 years ago)

Tags:
Configuration, Troubleshooting, Ruckus Cloud WiFi

Votes:
5

This article is:
helpful
not helpful